TWO-WAY SPEAKERS
Two-way speakers are designed to provide a good frequency response and are commonly used for quality music distribution (usually in the foreground, as is the case in some stores or bars).
- Bass bandwidth below 100 Hz and treble bandwidth up to 20,000 Hz, with a flat response.
- Models come in a wide variety of power ratings to suit any situation, with smaller ones under 15 W and larger cabinets of 200 and 300 W.
- Models are available with or without a transformer (for high-power speakers) or with a low-impedance input available.
- The aesthetics of this type of speaker are important due to the type of room in which they will be installed. The variety of designs, colors, and mounting options (wall, floor, or ceiling, surface-mounted, or recessed) is extensive.
- They are complemented by subwoofers for low-frequency reinforcement.
- Some models have directional speakers, or their parameters are controlled externally with audio processors (usually DSP).
- These speakers are used in hotel lobbies with high ceilings, meeting rooms, auditoriums, aerobic rooms in gyms, large shopping malls, pubs and music bars, fashion stores, trade shows, etc.
Calculator - exterior of a shopping center
For proper outdoor soundproofing in a shopping center, we will opt for two clusters of four speakers, approximately every 800 m2. These figures should be taken as a guide. Consult us if you have any questions.
At a height of approximately 9-10 meters, we will install a cluster of four high-power speakers. At a height of 3-4 meters, we will install another cluster of four low-to-medium-power speakers to reinforce the shadowed areas under the upper cluster.
This system requires independent control over the upper and lower clusters to balance the acoustic coverage throughout the entire facility.
Help articles
Attenuation | Noise | Two-way speakers | Catalogue
