TWO-WAY SPEAKERS
Two-way speakers are designed to provide a good frequency response and are commonly used for quality music distribution (usually in the foreground, as is the case in some stores or bars).
- Bass bandwidth below 100 Hz and treble bandwidth up to 20,000 Hz, with a flat response.
- Models come in a wide variety of power ratings to suit any situation, with smaller ones under 15 W and larger cabinets of 200 and 300 W.
- Models are available with or without a transformer (for high-power speakers) or with a low-impedance input available.
- The aesthetics of this type of speaker are important due to the type of room in which they will be installed. The variety of designs, colors, and mounting options (wall, floor, or ceiling, surface-mounted, or recessed) is extensive.
- They are complemented by subwoofers for low-frequency reinforcement.
- Some models have directional speakers, or their parameters are controlled externally with audio processors (usually DSP).
- These speakers are used in hotel lobbies with high ceilings, meeting rooms, auditoriums, aerobic rooms in gyms, large shopping malls, pubs and music bars, fashion stores, trade shows, etc.
Calculator - hotel lobbies
Hotel lobbies are large, high-volume areas where ambient noise typically hovers above 60 dB.
The speakers are installed on the wall, each covering between 100 and 200 m2, depending on the height at which they are installed.
The purpose of the system is to broadcast background music and announcements, which must always be above the noise level to ensure proper reception of the message.
Help articles
Attenuation | Noise | Two-way speakers | Catalogue
ATTENTION: The results provided by the calculators can only be considered as a quick help and/or initial recommendation and do not replace an acoustic study, which takes into account the architecture, materials, contributions of all speakers according to their location... Consult us and we will advise you.
